Development, production, engineering of industrial electronics

Development, production, engineering of industrial electronics

Measuring Terminal MT-5

MT-5 Measuring Terminal is intended for measuring, monitoring and analyzing energy quantities in low voltage plants with very low volume of space (e.g.. in the apparatus groups). MT-5 replaces more than 30 conventional measuring instruments and converters. In addition to measuring the power quantities, the Measuring Terminal also allows the voltage and current distortion analysis (THD measurement, measurement of individual harmonics of current and voltage).

Due to the built-in memory and real-time clock, the measuring terminal has the ability to register maximum, mean and minimum values of current and voltage, as well as power and energy with time stamp.

If two tariff information is used (programmable time setting), the MT-5 can register the total active and reactive energy per each tariff as well as the total amount of energy. Measuring values are registered and analyzed by the MT-Dialog 3 software package. The MT-5 terminal can be connected via the RS485, optical or Ethernet communication to the Info terminal ITE-2 for remote consumption cost control, i.e. rational energy management.

[showhide type=”opis” more_text=”Show more” less_text=”Show less”]

  • measurement of true RMS voltage and current values with accuracy of 0.2%, power (P, Q, S) with accuracy of 0.4%
  • measurement of power factor (cos φ), frequency, active and reactive energy in four quadrants and two directions
  • measurement of mean values of current, power (P, Q, S) in time interval (MD-maximum demand)
  • measurement of asymmetry, THD and harmonics (up to 31) of current and voltage
  • recording maximum, mean and minimum values of current and voltage as well as powers and energies with time-stamp
  • recording active and reactive energy according to tariffs (up to two tariffs) and total (option)
  • alphanumeric LCD with 2×8 characters with backlight
  • the ability to read data from the front of the device (mini USB port)
  • RS485, F.O., Ethernet communication with a master system
  • MODBUS RTU, MODBUS TCP communication protocol with master system
  • very small dimensions, panel mounting 72x72mm (DIN43700)

[/showhide]

Back to top